BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//IMN - ECPv6.17.3//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:IMN
X-ORIGINAL-URL:https://www.cnrs-imn.fr/en/
X-WR-CALDESC:Events for IMN
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:Europe/Paris
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261215T140000
DTEND;TZID=Europe/Paris:20261215T153000
DTSTAMP:20261119T160451Z
CREATED:20261109T151142Z
LAST-MODIFIED:20261119T160451Z
UID:8156-1797343200-1797348600@www.cnrs-imn.fr
SUMMARY:Marc ROBERT Seminar
DESCRIPTION:Molecules and Materials: A Fruitful (and Necessary) Combination for CO₂ Catalysis \n\nMarc ROBERT \nParis Institute of Molecular Chemistry\, Sorbonne University-CNRS \nAbstract \nInformation to be announced \n  \nContact: Nicolas Barreau (MIOPS)
URL:https://www.cnrs-imn.fr/en/event/marc-robert-seminar/
LOCATION:Amphi IMN Lombarderie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/11/ROBERT_Marc_2024.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261215T090000
DTEND;TZID=Europe/Paris:20261215T120000
DTSTAMP:20261105T144656Z
CREATED:20261027T165635Z
LAST-MODIFIED:20261105T144656Z
UID:7914-1797325200-1797336000@www.cnrs-imn.fr
SUMMARY:Thesis Defense by Nathanaël BLOND (PMN)
DESCRIPTION:Dynamics and mechanisms of formation of submicron conducting filaments under electrical excitation in Mott insulator V₂O₃ : Cr\nAbstract: \nMott insulators exhibit an insulator-to-metal transition that can be induced by electrical loading\, opening up possibilities for the development of functional electronic devices. This thesis investigates the physical mechanisms of resistive switching in thin films of chromium -substituted V₂O₃ \, focusing on the formation and evolution of volatile and non-volatile conducting filaments.  \nVolatile switching is studied using time-resolved electrical measurements to characterize the dynamics of the transition and the relaxation of the system. The results are analyzed in light of electronic excitation mechanisms and thermal effects\, within the Fröhlich model.  \nNonvolatile switching is the subject of a multiscale characterization of the filament that combines electrical measurements\, electron microscopy\, atomic force microscopy\, near-field infrared microscopy\, and X-ray diffraction at the nanometer scale. These approaches make it possible to study the properties of the sub-micrometer-scale conductive filament and to examine the mechanisms that may stabilize the metallic state.  \nFinally\, the coupling between V2O3 :Cr and gold nanoislands is explored in order to evaluate the possibilities of interaction between plasmonic optical properties and electronic properties of the material. \nKeywords: Mott insulator\, Insulator-metal transition\, Resistive switching\, Conductive filaments\, Thin films\, Nanoscale characterization\, Plasmonic coupling \n\nDynamics and Formation Mechanisms of Submicron Conductive Filaments under Electrical Excitation in the Mott Insulator V 2 O 3 :Cr\nAbstract: \nMott insulators exhibit an insulator-to-metal transition that can be induced by electrical stimuli\, offering prospects for the development of functional electronic devices. This thesis investigates the physical mechanisms underlying resistive switching in chromium-doped V 2 O 3 thin films\, focusing on the formation and evolution of volatile and non-volatile conductive filaments.  \nVolatile switching is investigated using time-resolved electrical measurements to characterize the transition dynamics and relaxation processes. The results are analyzed in terms of electronic excitation mechanisms and thermal effects within the Fröhlich model.  \nNon-volatile switching is studied using a multiscale characterization approach of the filament that combines electrical measurements\, electron and atomic force microscopy\, scattering-type scanning near-field infrared microscopy\, and nanoscale X-ray diffraction. These techniques enable the investigation of sub-micrometer-scale conductive channel properties and the assessment of possible mechanisms responsible for stabilizing the metallic state.  \n  Finally\, the potential coupling between V 2 O 3 :Cr and gold nano-islands is explored to evaluate the prospects for interaction between the material’s plasmonic optical response and its electronic properties. \nKeywords: Mott insulator\, insulator-to-metal transition\, resistive switching\, conductive filaments\, thin films\, nanoscale characterization\, plasmonic coupling
URL:https://www.cnrs-imn.fr/en/event/thesis-defense-by-nathanael-blond-pmn/
LOCATION:Amphi IMN Lombarderie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/02/blond_nathanael.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261209T100000
DTEND;TZID=Europe/Paris:20261209T130000
DTSTAMP:20261116T100537Z
CREATED:20261106T142612Z
LAST-MODIFIED:20261116T100537Z
UID:8136-1796810400-1796821200@www.cnrs-imn.fr
SUMMARY:Thesis Defense by Thi Thuy Duyen NGUYEN (ST2E)
DESCRIPTION:Search for new materials for flexible high-temperature fuel cells that can operate in the presence of CH₄ and H₂S\nAbstract: \nThis thesis focuses on three families of fuel cell electrode materials: Ce₀.₆₃Zr₀.₃₃Sm₀.₀₄O₂₋δ – xNiO (x = 0\, 10\, 20\, 30 mass percent Ni)\, (Ce₀.₈Sm₀.₂)₁₋_xNixO₂₋_δ – NiO(a₋_x) (x < 0.05; a = 5\, 30\, 50 molar % Ni)\, and Ln₀.₅Sr₁.₅Mn₀.₇Ni₀.₃O₄ (Ln = La and Pr). For each of the compounds\, the synthesis\, its optimization\, and subsequent structural characterization are presented. Their electrochemical properties are then analyzed by electrochemical impedance spectroscopy in humidified H₂/Ar from 600 to 700 °C. All of the materials studied demonstrated promising electrochemical properties for use as SOFC anodes. \nTheir electrochemical performance and stability—under H2\, as well as under CH4\, CO2\, and H2S—were then studied\, with the fabrication of numerous complete cells. Cerium-based materials demonstrated good stability in CH₄/CO₂ for over 100 hours\, whereas lanthanum-based perovskite materials still exhibit certain limitations. Cerium-based materials proved sensitive to just a few ppm of H₂S\, leading to a gradual decline in performance. Post-mortem analyses were conducted to confirm the structural stability of the anode and to identify and explain any degradation phenomena\, particularly carbon deposition and sulfur-related effects. \nKeywords: Electrochemical impedance\, Electrode\, Fuel cell\, Flexibility\, H2S\, CH4 \n\nNovel Materials for Fuel-Flexible High-Temperature Fuel Cells Operating in the Presence of CH₄ and H₂S\nAbstract: \nThis thesis focuses on three families of fuel cell electrode materials: Ce₀.₆₃Zr₀.₃₃Sm₀.₀₄O₂₋δ – xNiO (x = 0\, 10\, 20\, and 30 wt.% Ni)\, (Ce₀.₈Sm₀.₂)1-xNixO2-δ – NiO(a-x) (x < 0.05; a = 5\, 30\, and 50 mol.% Ni) and Ln0.5Sr1.5Mn0.7Ni0.3O4 (Ln = La and Pr). For each material\, synthesis and optimization are investigated\, along with structural and microstructural characterization. Their electrochemical properties are evaluated by impedance spectroscopy in a humidified H₂/Ar environment at temperatures ranging from 600 to 700 °C. All materials exhibit promising electrochemical properties for potential use as solid oxide fuel cell (SOFC) anodes. \nTheir electrochemical performance and stability under different fuel atmospheres\, including H2\, CH4\, CO2\, and H2S\, are subsequently studied using fabricated complete cells. Cerium-based materials demonstrate good stability under CH4/CO2 for more than 100 hours\, whereas lanthanum-based perovskite materials still exhibit certain limitations. Cerium-based materials are also sensitive to H₂S at concentrations of a few ppm\, showing a gradual decline in electrochemical performance. Post-mortem analyses were conducted to confirm the structural stability of the anode and to identify and explain any degradation phenomena\, particularly carbon deposition and sulfur-related effects. \nKeywords: Impedance\, Electrode\, Fuel cell\, Flexibility\, H2S\, CH4
URL:https://www.cnrs-imn.fr/en/event/thesis-defense-by-thi-thuy-duyen-nguyen-st2e/
LOCATION:Amphi IMN Lombarderie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/02/nguyen_duyen.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261207T140000
DTEND;TZID=Europe/Paris:20261207T170000
DTSTAMP:20261105T144943Z
CREATED:20261105T144943Z
LAST-MODIFIED:20261105T144943Z
UID:8130-1796652000-1796662800@www.cnrs-imn.fr
SUMMARY:Thesis Defense by Rizki HANIFAH (ST2E)
DESCRIPTION:Characterization of Interfacial Processes in Operating Lithium Batteries Using SHINERS\nAbstract: \nControlling the interfacial reactivity between the electrolyte and the electrode in lithium-ion batteries (LIBs) is a prerequisite for the development of new high-energy-density battery materials. One of the main causes of capacity loss over time is the repeated formation and dissolution of the electrode’s passive layer during charge-discharge cycles\, known as the SEI/CEI layer. Understanding interfacial properties makes it possible to optimize both the electrode and electrolyte formulations. The challenge stems from the fact that the interface is thin\, buried\, and complex in nature (multilayers of organic and inorganic compounds\, a mosaic structure of various compounds)\, and that its structure and composition evolve during battery operation. This work aims to study the dynamic formation and composition of the interfacial layer (SEI/CEI) during battery operation (operando) using micro-Raman spectroscopy combined with a signal amplification technique employing core-shell nanoparticles (Au@SiO₂: Shell-Isolated Nanoparticles—SHIN) as plasmonic nanoamplifiers (Shell-Isolated Nanoparticle Enhanced Raman Spectroscopy: SHINERS). SHINs exhibit a plasmonic resonance upon excitation in the near-infrared (785 nm)\, which allows for amplification of the interfacial signal while minimizing the “bulk” Raman and autofluorescence signals from the surrounding materials (electrode and electrolyte). This approach was applied within modified CR2032 button cells to study the interfacial dynamics of a promising electrode material for lithium-ion batteries (silicon anode) and in anode-free Cu/Li-based battery systems. \nKeywords: Lithium batteries\, Interphase\, Operando\, Raman\, SHINERS \n\nCharacterization of Interfacial Processes in Operating Lithium-Ion Batteries Using SHINERS\nAbstract: \nControlling the interfacial reactivity between the electrolyte and the electrode in lithium-ion batteries (LIBs) is a prerequisite for the development of new battery materials with high energy density. One of the main causes of capacity fading over time is the repeated formation and dissolution of the electrode’s passive layer during cycling—the so-called SEI/CEI layer. Understanding these interfacial properties enables the optimization of both the electrode and electrolyte formulations. The challenge stems from the fact that the interfacial layer is thin\, buried\, and complex in nature (consisting of multiple layers of organic and inorganic compounds and a mosaic structure of various compounds)\, and that its structure and composition evolve during battery operation. This work aims to investigate the dynamic formation and composition of the interfacial layer (SEI/CEI) during battery operation (operando) by developing micro-Raman spectroscopy in combination with a signal enhancement technique using core-shell nanoparticles (Au@SiO₂: Shell-Isolated Nanoparticles—SHINs) as plasmonic signal nanoamplifiers (Shell-Isolated Nanoparticle-Enhanced Raman Spectroscopy: SHINERS). SHINs\, which exhibit plasmonic resonance under near-infrared excitation (785 nm)\, were designed to enhance the interfacial signal while minimizing the “bulk” Raman and autofluorescence signals from the surrounding materials (electrode and electrolyte). This approach was applied in modified CR2032 coin cells to study the interfacial dynamics of a promising electrode material in lithium-ion batteries (silicon anode) and in anode-free battery systems based on Cu/Li. \nKeywords: Lithium batteries\, Interphase\, Operando\, Raman\, SHINERS
URL:https://www.cnrs-imn.fr/en/event/thesis-defense-by-rizki-hanifah-st2e-2/
LOCATION:Amphi IMN Lombarderie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/02/rassane_anas.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261207T140000
DTEND;TZID=Europe/Paris:20261207T170000
DTSTAMP:20261106T142545Z
CREATED:20261105T142753Z
LAST-MODIFIED:20261106T142545Z
UID:8094-1796652000-1796662800@www.cnrs-imn.fr
SUMMARY:Thesis Defense by Rizki HANIFAH (ST2E)
DESCRIPTION:Characterization of Interfacial Processes in Operating Lithium Batteries Using SHINERS\nAbstract: \nControlling the interfacial reactivity between the electrolyte and the electrode in lithium-ion batteries (LIBs) is a prerequisite for the development of new high-energy-density battery materials. One of the main causes of capacity loss over time is the repeated formation and dissolution of the electrode’s passive layer during charge-discharge cycles\, known as the SEI/CEI layer. Understanding interfacial properties makes it possible to optimize both the electrode and electrolyte formulations. The challenge stems from the fact that the interface is thin\, buried\, and complex in nature (multilayers of organic and inorganic compounds\, a mosaic structure of various compounds)\, and that its structure and composition evolve during battery operation. This work aims to study the dynamic formation and composition of the interfacial layer (SEI/CEI) during battery operation (operando) using micro-Raman spectroscopy combined with a signal amplification technique employing core-shell nanoparticles (Au@SiO₂: Shell-Isolated Nanoparticles—SHIN) as plasmonic nanoamplifiers (Shell-Isolated Nanoparticle Enhanced Raman Spectroscopy: SHINERS). SHINs exhibit a plasmonic resonance upon excitation in the near-infrared (785 nm)\, which allows for amplification of the interfacial signal while minimizing the “bulk” Raman and autofluorescence signals from the surrounding materials (electrode and electrolyte). This approach was applied within modified CR2032 button cells to study the interfacial dynamics of a promising electrode material for lithium-ion batteries (silicon anode) and in anode-free Cu/Li-based battery systems. \nKeywords: Lithium batteries\, Interphase\, Operando\, Raman\, SHINERS \n\nCharacterization of Interfacial Processes in Operating Lithium-Ion Batteries Using SHINERS\nAbstract: \nControlling the interfacial reactivity between the electrolyte and the electrode in lithium-ion batteries (LIBs) is a prerequisite for the development of new battery materials with high energy density. One of the main causes of capacity fading over time is the repeated formation and dissolution of the electrode’s passive layer during cycling—the so-called SEI/CEI layer. Understanding these interfacial properties enables the optimization of both the electrode and electrolyte formulations. The challenge stems from the fact that the interfacial layer is thin\, buried\, and complex in nature (consisting of multiple layers of organic and inorganic compounds and a mosaic structure of various compounds)\, and that its structure and composition evolve during battery operation. This work aims to investigate the dynamic formation and composition of the interfacial layer (SEI/CEI) during battery operation (operando) by developing micro-Raman spectroscopy in combination with a signal enhancement technique using core-shell nanoparticles (Au@SiO₂: Shell-Isolated Nanoparticles—SHINs) as plasmonic signal nanoamplifiers (Shell-Isolated Nanoparticle-Enhanced Raman Spectroscopy: SHINERS). SHINs\, which exhibit plasmonic resonance under near-infrared excitation (785 nm)\, were designed to enhance the interfacial signal while minimizing the “bulk” Raman and autofluorescence signals from the surrounding materials (electrode and electrolyte). This approach was applied in modified CR2032 coin cells to study the interfacial dynamics of a promising electrode material in lithium-ion batteries (silicon anode) and in anode-free battery systems based on Cu/Li. \nKeywords: Lithium batteries\, Interphase\, Operando\, Raman\, SHINERS
URL:https://www.cnrs-imn.fr/en/event/thesis-defense-by-rizki-hanifah-st2e/
LOCATION:Amphi IMN Lombarderie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/02/hanifah_rizki.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261207T100000
DTEND;TZID=Europe/Paris:20261207T113000
DTSTAMP:20261119T160451Z
CREATED:20261117T144908Z
LAST-MODIFIED:20261119T160451Z
UID:8252-1796637600-1796643000@www.cnrs-imn.fr
SUMMARY:Laurence HARDWICK Seminar
DESCRIPTION:What have the Ramans ever done for us? \n\nLaurence HARDWICK \nHelmholtz Institute Ulm (HIU) \nAbstract \nInformation to follow \nContact: Ivan Lucas (ST2E)
URL:https://www.cnrs-imn.fr/en/event/laurence-hardwick-seminar/
LOCATION:Amphi IMN Lombarderie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/11/Laurence_Hardwick.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261204T093000
DTEND;TZID=Europe/Paris:20261204T123000
DTSTAMP:20261119T162319Z
CREATED:20261119T162319Z
LAST-MODIFIED:20261119T162319Z
UID:8411-1796376600-1796387400@www.cnrs-imn.fr
SUMMARY:Thesis Defense by Hannah NICKLES JÄKEL (ST2E)
DESCRIPTION:Assessment and Mitigation of Damage Caused by an Electron Beam in Battery Materials: Toward Improved In Situ STEM-EELS Characterization Using Alternative Scanning Approaches\nAbstract: \nThe performance of lithium-ion batteries is limited by nanoscale degradation at the electrode-electrolyte interfaces. STEM-EELS microscopy under conditions operando would allow for the study of these phenomena\, but the damage caused by the electron beam limits the achievable spatial and temporal resolutions. This thesis evaluates interlaced scanning as a strategy for reducing this damage in beam-sensitive battery materials. New patterns\, based on raster\, rotating serpentine\, and rotating Hilbert trajectories\, were designed to distribute the fluence more uniformly than a conventional raster scan. The study focuses on thin films of LiF\, representative of an inorganic component of the solid-electrolyte interface (SEI) layer\, as well as the carbonate solvent DEC and the LiPF6 in an EC:DEC mixture. In LiF\, interlaced scanning reduces radiation-induced defect formation\, agglomeration\, and material loss by up to 22%. Its effectiveness depends on the spacing between probe positions\, the beam current\, and the substrate’s conductivity. These results highlight the potential of this approach to improve the resolution of STEM-EELS studies. operando battery interfaces while minimizing beam-induced artifacts. \nKeywords: Electron beam damage\, Scanning transmission electron microscopy\, Lithium fluoride\, Non-aqueous carbonate solvents\, Solid electrolyte interface\, Scan patterns \n\nEvaluating and Mitigating Beam Damage in Battery Materials: Advancing In Situ STEM-EELS Through Alternative Scanning Approaches\nAbstract: \nLithium-ion battery performance is limited by nanoscale degradation at the electrode-electrolyte interface. Operando STEMEELS could shed light on these dynamics\, but electron beam damage severely limits the achievable spatial and temporal resolution. This thesis evaluates interleaved scan patterns as a strategy to mitigate damage in beam-sensitive battery materials. Novel interleaved scans based on raster\, rotated snake\, and rotated Hilbert patterns were designed to distribute fluence more uniformly than conventional raster scanning. Model battery material samples—\n—were investigated: LiF thin films as a representative inorganic SEI component\, and the carbonate solvent DEC and electrolyteLiPF₆ in EC:DEC as liquid systems. In LiF\, interleaved scans reduced radiation-induced defect formation\, agglomeration\, and mass loss by up to 22%\, with the extent of mitigation depending on probe spacing\, flux\, and substrate conductivity. These results highlight the potential of interleaved scanning to enable higher-resolution operando STEM-EELS investigations of battery interfaces with reduced beam-induced artifacts. \nKeywords: Electron Beam Damage\, Scanning Transmission Electron Microscopy\, Lithium Fluoride\, Non-Aqueous Carbonate Solvents\, Solid Electrolyte Interphase\, Scan Pattern
URL:https://www.cnrs-imn.fr/en/event/thesis-defense-by-hannah-nickles-jakel-st2e/
LOCATION:Amphi IMN Lombarderie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/02/nickles_jakel_hannah.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261127T140000
DTEND;TZID=Europe/Paris:20261127T170000
DTSTAMP:20261120T091123Z
CREATED:20261014T083529Z
LAST-MODIFIED:20261120T091123Z
UID:7787-1795788000-1795798800@www.cnrs-imn.fr
SUMMARY:Thesis Defense by Shunfa GONG (MIOPS)
DESCRIPTION:Structure-Property Relationships in Luminescent Alkali Metal Halide Hybrid Perovskites\nAbstract: This dissertation examines the relationships between composition\, structure\, and luminescence in lead-free alkali metal hybrid halides by analyzing the roles of halide anions\, alkali metal cations\, and organoammonium cations. \nA study of halide ion substitution in piperazinium-based 3D perovskites shows that\, among the compounds studied\, only the iodide equivalent exhibits intense broadband emission. Spectroscopic and compositional analyses point to an emission mechanism associated with defects linked to the presence of excess iodine species.  \nThe substitution of alkali metal cations made it possible to change the dimensionality of the inorganic lattice from 3D to 1D and to obtain broad-band emissions in the 540–644 nm range. \nThe choice of specific organic cations\, such as morpholinium\, allows the crystallization of various inorganic alkali metal halide networks emitting around 578–600 nm. Chiral organic cations also lead to non-centrosymmetric crystals of the space group P212121 \, exhibiting broadband photoluminescence and second – harmonic generation. Together\, these results highlight the influence of hydrogen bonding on structural and optical properties.   \nOverall\, this thesis demonstrates that adjusting the composition is an effective strategy for controlling structural dimensionality\, defect-associated excited states\, and broad-band luminescence in lead-free alkali metal hybrid halides. \nKeywords: Hybrid materials\, perovskite-type alkali metal halides\, photoluminescence\, dimensionality \n\nStructure-Property Relationships in Luminescent Hybrid Alkali Metal Halide Perovskites\nAbstract: This thesis investigates the relationships between composition\, structure\, and luminescence in lead-free hybrid alkali-metal halides through a systematic analysis of the roles of halide\, alkali metal\, and organoammonium ions. \nA study of halide substitution in 3D piperazinium-based perovskites demonstrated that only the hybrid alkali metal iodide exhibits intense broadband emission. Spectroscopic and compositional analyses support a defect-associated emission mechanism related to excess iodine species.  \nAlkali-metal substitution enabled the tuning of the structural dimensionality from 3D to 1D\, resulting in broadband emission over approximately 540–644 nm. \nThe selection of specific organic cations such as morpholinium enables the crystallization of various inorganic alkali iodide networks emitting around 578 600 nm. Chiral organic cations further generate non-centrosymmetric P 2 1 2 1 2 1 crystals exhibiting broadband photoluminescence and secondharmonic generation. Together\, these findings highlight the influence of molecular coordination and hydrogen bonding on structural and optical properties.   \nOverall\, this thesis demonstrates that compositional strategy provides an effective means of controlling structural dimensionality\, defect-associated excited states\, and broadband luminescence in lead-free hybrid alkali-metal halides. \nKeywords: Hybrid materials\, alkali metal halide perovskite\, photoluminescence\, structural dimensionality
URL:https://www.cnrs-imn.fr/en/event/thesis-defense-by-shunfa-gong-miops/
LOCATION:Amphi IMN Lombarderie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/02/gong_shunfa.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261125T143000
DTEND;TZID=Europe/Paris:20261125T160000
DTSTAMP:20261029T102521Z
CREATED:20261029T102521Z
LAST-MODIFIED:20261029T102521Z
UID:8055-1795617000-1795622400@www.cnrs-imn.fr
SUMMARY:Seminar by Sébastien DUBOIS
DESCRIPTION:On Earth and in Space: The Burst of Innovation in Silicon Photovoltaic Technologies! \n\nSébastien Dubois \nCEA Liten Grenoble \nAbstract \nSilicon photovoltaic (PV) solar cells are revolutionizing the energy transition. Installed solar PV capacity has reached several terawatts\, and the selling price has fallen by a factor of 50 over the past 20 years. This success is due\, in part\, to significant technological innovations. Cell performance is approaching the limits of physics. However\, efficiency records continue to be broken with the emergence of new device architectures. The environmental impact of this technology has also been significantly reduced. The processing of silicon is a striking example of this. This presentation will provide an overview of the silicon photovoltaic industry and review recent landmark innovations. Furthermore\, the development of New Space and satellite constellations is driving rapid change in solar generator technologies: production must be scaled up and costs must be reduced. Silicon cells can meet these new requirements. However\, this technology must continue to evolve to address the challenges of orbital deployment\, such as radiation\, thermal cycling\, and micrometeorites. The presentation will discuss recent findings on adapting silicon cells to these extreme conditions.            \nContact: Nicolas Barreau (MIOPS)
URL:https://www.cnrs-imn.fr/en/event/seminar-by-sebastien-dubois/
LOCATION:Amphi IMN Lombarderie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/10/Sebastien_Dubois.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261123T140000
DTEND;TZID=Europe/Paris:20261123T170000
DTSTAMP:20261105T144436Z
CREATED:20261027T163449Z
LAST-MODIFIED:20261105T144436Z
UID:7906-1795442400-1795453200@www.cnrs-imn.fr
SUMMARY:Thesis Defense by Paula AGUILAR GUIMARÃES (ID2M)
DESCRIPTION:Activation of Bentonite for the Development of a Low-Carbon Cement\nAbstract: The development of alternative supplementary cementitious materials (SCMs) is essential for reducing the environmental impact of cement\, and activated clays represent a promising option. This thesis investigates the influence of initial mineralogical composition and activation conditions on the physicochemical transformations of natural bentonites. Six bentonites were studied using various approaches\, including calcination at different temperatures and by different methods\, as well as mechanochemical activation (MCA). The results show that the clay mineral content alone is insufficient to predict the reactivity of bentonites\, highlighting the role of accessory minerals\, particularly silica polymorphs.    \nThe pozzolanic performance was more closely related to the non-diffracting fraction than to the degree of dehydroxylation. However\, the different activation processes produced non-diffracting materials with distinct local Al\, Si\, and hydroxyl environments\, highlighting the importance of their structural nature for reactivity.  \nIn addition\, a compressive strength test method using 20-mm mortar cubes has been validated to facilitate testing with small amounts of material. \nFinally\, this dissertation deepens our understanding of the activation of non-kaolinitic clays\, demonstrating that different processes can produce reactive bentonites through distinct structural mechanisms. \nKeywords: Accessory minerals; Calcination; Dehydroxylation; Mechanochemical activation; Supplementary cementitious materials \n\nActivation of bentonites for the development of low-carbon cement\nAbstract: The development of alternative supplementary cementitious materials (SCMs) is essential to reduce the environmental impact of cement production\, with activated clays emerging as promising options. This thesis studies the activation of natural bentonites\, focusing on how the initial mineralogical composition and activation conditions influence the physicochemical transformations of the activated materials. Six natural bentonites were investigated using various experimental approaches\, including thermal activation at different temperatures and using different calcination methods\, as well as mechanochemical activation (MCA) as an alternative method. It was demonstrated that clay mineral content alone cannot predict bentonite reactivity\, highlighting the influence of accessory minerals\, particularly silica polymorphs.    \nThe degree of dehydroxylation was not the primary indicator of pozzolanic performance\, which was more closely associated with the non-diffracting fraction. Furthermore\, it was observed that different activation processes produced non-diffracting materials with distinct local Al\, Si\, and hydroxylated environments\, demonstrating that their structural nature strongly affects the reactivity of activated clays.  \nIn addition\, a reduced-scale compressive strength testing method using 20-mm mortar cubes was validated to facilitate testing with limited amounts of material. \nOverall\, this thesis advances our understanding of the activation of non-kaolinitic clays\, demonstrating that different activation methods can produce reactive bentonites through various structural modification mechanisms. \nKeywords: Accessory Minerals; Calcination; Dehydroxylation; Mechanochemical Activation; Supplementary Cementitious Materials
URL:https://www.cnrs-imn.fr/en/event/thesis-defense-by-paula-aguilar-guimaraes-id2m/
LOCATION:Amphi IMN Lombarderie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/02/aguilar_guimaraes_paula.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261112T150000
DTEND;TZID=Europe/Paris:20261112T163000
DTSTAMP:20261106T130108Z
CREATED:20261106T130108Z
LAST-MODIFIED:20261106T130108Z
UID:8127-1794495600-1794501000@www.cnrs-imn.fr
SUMMARY:Seminar by Fatiha CHALLALI
DESCRIPTION:Thin Metallic Coatings for Bioresorbable Implants: The Role of Zirconium in Corrosion Control \n\nFatiha Challali \nLSPM-Sorbonne Paris Nord University \nAbstract \nThin metal layers make it possible to adjust a material’s properties and modify its surface reactivity. Used either as materials in their own right or as coatings\, they open up new possibilities for controlling corrosion. In the field of bioresorbable implants\, the challenge is to control the rate of degradation in order to tailor the material’s lifespan to its temporary function. Zinc- and magnesium-based alloys are promising candidates\, whose behavior in physiological environments depends closely on their composition and microstructure. The addition of zirconium provides a means to modify their microstructure and adjust their corrosion kinetics. This presentation will address the preparation of these alloys as thin films via magnetron co-sputtering and the relationships between zirconium content\, microstructure\, and degradation. It will compare the amorphous structures obtained for certain compositions of the zinc-zirconium system with the nanocrystalline structures of the magnesium-zirconium system. The results will enable a discussion of the influence of zirconium and the structural state on corrosion behavior\, as well as the role of passivation in the performance of films under immersion. This work illustrates the potential of thin films for developing materials and coatings with controlled degradation\, intended for bioresorbable applications. \n  \nContact: Marie-Paule Besland (PCM)
URL:https://www.cnrs-imn.fr/en/event/seminar-by-fatiha-challali/
LOCATION:IMN Board Room
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/11/Fatiha_Challali2.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261112T133000
DTEND;TZID=Europe/Paris:20261112T150000
DTSTAMP:20261106T111545Z
CREATED:20261106T104803Z
LAST-MODIFIED:20261106T111545Z
UID:8117-1794490200-1794495600@www.cnrs-imn.fr
SUMMARY:"Solid-State Chemistry Thursdays" Seminar - Cyrille Hamon (CNRS\, Solid-State Physics Laboratory\, Paris-Saclay University)
DESCRIPTION:Assembling Nanoparticles to Control Light \n \nCyrille Hamon \nCNRS\, Laboratory of Solid-State Physics\, Paris-Saclay University \nVideo: https://univ-nantes-fr.zoom.us/s/81230190542 \nGold and silver nanoparticles exhibit remarkable optical properties\, which depend in particular on their size and shape. These properties have been harnessed since ancient times\, as evidenced by glass colored by metal nanoparticles. When these nanoparticles are organized\, their properties can be profoundly altered: interactions between particles give rise to collective properties that are not simply the sum of those of the individual nanoparticles. These plasmonic coupling phenomena can thus be harnessed to develop new functionalities\, such as in plasmonic photocatalysis\, surface-enhanced Raman spectroscopy (i.e.\, the SERS effect)\, or colorimetric detection (e.g.\, COVID-19 testing). \nOur research falls within this framework and aims to understand how the shape and anisotropy of nanoparticles can be used to create materials with novel properties. In particular\, we are studying the formation of structures with low symmetries that can give rise to anisotropic optical properties. We are also seeking to make these assemblies reconfigurable: to control their organization\, assemble and disassemble them\, modify the orientation of the nanoparticles\, and\, ultimately\, control their interaction with light. The goal is thus to move from static plasmonic materials to materials capable of transforming their structure and optical properties in response to their environment. \n 
URL:https://www.cnrs-imn.fr/en/event/solid-state-chemistry-thursdays-seminar-cyrille-hamon-cnrs-solid-state-physics-laboratory-paris-saclay-university/
LOCATION:Videoconferencing
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/11/Cyrille_Hamon.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261112T103000
DTEND;TZID=Europe/Paris:20261112T120000
DTSTAMP:20261106T111601Z
CREATED:20261103T084845Z
LAST-MODIFIED:20261106T111601Z
UID:8082-1794479400-1794484800@www.cnrs-imn.fr
SUMMARY:Eugène BERTIN Seminar
DESCRIPTION:Combinatorial Hardware and Software for Accelerated Discovery of Multianion Optoelectronic Thin Films \n\nEugène Bertin \nNational Center for Nanofabrication and Characterization – DTU Orbit\, Lyngby\, Denmark \nAbstract \nMulti-anion semiconductors—compounds that combine two or more anion species\, such as S\, P\, N\, or Se—offer a remarkable degree of chemical and structural diversity for optoelectronics\, yet studies on their thin-film synthesis remain scarce. We address this with a glove-box-integrated combinatorial platform: a reactive sputtering chamber (PH3\, H2S\, NH3\, N2  and a S cracking source)\, a rapid thermal annealing furnace that uses the same reactive gases\, and an evaporator for volatile metals. Two-dimensional compositional gradients on a single substrate enable rapid mapping of unexplored composition space\, while an IA-ready data infrastructure built on NOMAD captures the structural and optoelectronic property data of the entire sample libraries. Across more than 20\,000 samples in exotic ternary systems\, including Zr-S-N\, Ba-Cd-P\, Cu-P-S\, Ag-P-S\, Sn-P-S\, Sb-P-S\, Ba-P-S\, Ba-Zr-S\, and Ba-P-Te\, we highlight the defect-tolerant Zintl phase BaCd2P2  BaP\, synthesized for the first time as a thin film\,4Te2  with unusual P-Te bonds and novel SnPS3  and Cu3P.S.4\, two vacuum-processed phosphosulfides with photoluminescence. \nWe also report the first Zr sulfonitride2SN2  thin film\, a member of the unexplored (Hf\,Zr)2(S\,Se)N2  a family of chalcogenides that defy the usual trade-off between refractive index\, transparency\, and free-carrier conductivity. Hybrid density functional theory predicts low effective masses\, UV absorption edges\, and sub-bandgap refractive indices of up to 2.84\, exceeding those of TiO2  and SiC\, but no method for synthesizing thin films existed. Reactive sputtering followed by rapid thermal annealing yields the first chalconitride thin film\, Zr2SN2\, which confirms the predictions: refractive index n  >  2.7\, absorption edge at 2.9 eV\, and degenerate n-type conductivity (carrier concentration  >1020  cm-3\, in-grain mobility  >  8 cm2V-1s-1). The theory attributes this unusual combination to a decoupled band structure with forbidden optical transitions at the direct bandgap\, a very large density of states in the UV\, and low effective masses at the indirect bandgap. A transparent conductor that is also a high-index dielectric could serve simultaneously as an antireflection\, index-matching\, and charge-extraction layer in thin-film photovoltaics and opens up a new design space for photonics more broadly. Zr2SN2  illustrates what combinatorial exploration of multi-anion chemistry can achieve. \nContact: Léo Choubrac (MIOPS)
URL:https://www.cnrs-imn.fr/en/event/eugene-bertin-seminar/
LOCATION:Amphi IMN Lombarderie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/11/Eugene_Bertin.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261112T093000
DTEND;TZID=Europe/Paris:20261112T123000
DTSTAMP:20261105T144424Z
CREATED:20261027T162207Z
LAST-MODIFIED:20261105T144424Z
UID:7900-1794475800-1794486600@www.cnrs-imn.fr
SUMMARY:Thesis Defense by Ilana BIDON (ID2M)
DESCRIPTION:Impact of the Friction Stir Welding Process on the Microstructure and Surface Reactivity of Aluminum-Copper Alloys\nAbstract: Welding processes are increasingly used in the aerospace industry\, particularly to replace mechanical fasteners\, which saves time\, reduces weight\, and lowers fuel consumption. The friction stir welding (FSW) process has attracted significant interest in recent decades\, particularly due to its ability to overcome the limitations encountered when fusion-welding aluminum alloys. Among the aluminum alloys used in aerospace\, the 2xxx series (based on the Al-Cu system) is valued for its mechanical properties\, which can be enhanced through precipitation heat treatment. Its poor weldability in fusion welding—particularly due to its susceptibility to hot cracking during solidification—makes it an ideal candidate for solid-state processes such as FSW.    \nHowever\, the severe thermomechanical cycles characteristic of FSW generate significant microstructural gradients that profoundly alter the corrosion susceptibility of the welded zones. Appropriate surface protection is therefore necessary to protect FSW-welded zones against corrosion. This doctoral dissertation investigates the impact of the FSW process on the microstructure and surface reactivity of the AA2219 alloy in order to evaluate the effectiveness of surface protection systems designed for welded zones. A multiscale understanding of the relationship between FSW metallurgy\, surface electrochemical behavior\, and the effectiveness of tartaric-sulfuric anodizing sealed with boiling water is thus established.    \nKeywords: Friction stir welding\, AA2219\, microstructure\, corrosion \n\nImpact of Friction Stir Welding on the Microstructure and Surface Reactivity of Al-Cu Binary Alloys\nAbstract: Welding processes are increasingly used in the aerospace industry\, particularly to replace mechanical fasteners\, which saves time\, reduces weight\, and lowers fuel consumption. The solid-state Friction Stir Welding (FSW) process has attracted significant interest in recent decades due to its ability to overcome the limitations encountered in the fusion welding of aluminum alloys. Among the aluminum alloys used in aircraft\, the 2xxx series (based on the Al-Cu system) is valued for its mechanical properties\, which can be enhanced through precipitation heat treatment. Its poor weldability during fusion welding—particularly due to its susceptibility to solidification hot cracking—makes it an ideal candidate for solid-state processes such as FSW.    \nHowever\, the severe thermomechanical cycles inherent in FSW generate sharp microstructural gradients that profoundly alter the local corrosion susceptibility of welded zones. Appropriate surface treatments are therefore necessary to protect FSW areas from corrosion. This doctoral thesis focuses on the impact of the FSW process on the microstructure and surface reactivity of the AA2219 alloy to evaluate the effectiveness of surface protection schemes intended for welded zones. A multiscale understanding of the relationship between FSW metallurgy\, surface electrochemical behavior\, and the protective efficiency of tartaric-sulfuric acid (TSA) anodization sealed via hydrothermal hot water sealing (HWS) is established.    \nKeywords: FSW\, AA2219\, microstructure\, corrosion
URL:https://www.cnrs-imn.fr/en/event/thesis-defense-by-ilana-bidon-id2m/
LOCATION:Lecture Hall 1\, IRESTE Chantrerie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/02/bidon_ilana.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261110T140000
DTEND;TZID=Europe/Paris:20261110T170000
DTSTAMP:20261105T144331Z
CREATED:20261014T082402Z
LAST-MODIFIED:20261105T144331Z
UID:7782-1794319200-1794330000@www.cnrs-imn.fr
SUMMARY:Thesis Defense by Alexia ROCHETEAU (MIOPS)
DESCRIPTION:Copper iodide-based materials exhibiting luminescent mechanochromic properties for the development of shock/strain sensors\nAbstract: Materials whose luminescent properties can be modulated in response to external stimuli are attracting growing interest for the development of numerous applications\, such as strain detection\, optical recording\, and information storage. Among these materials\, mechanochromic luminescent materials are characterized by a change in their luminescence properties in response to external mechanical stress\, such as grinding. Transition-metal-based materials—and in particular those based on copper(I) halide—are of interest due to their great structural diversity\, their varied photophysical properties\, and their economic and environmental advantages stemming from the low cost and limited toxicity of copper.   \nIn this context\, this thesis focuses on the study of new copper(I) iodide-based mechanochromic luminescent materials. New materials were synthesized\, and their structure and optical properties were characterized. Particular attention was paid to understanding the relationships between the structure and optical properties of these compounds. The materials were also incorporated into polymer matrices\, for example\, to explore potential applications.    \nKeywords: Hybrid materials\, Copper(I) iodide\, Optical properties\, Luminescence mechanochromism\, Luminescence thermochromism \n\nCopper iodide-based materials with luminescent mechanochromic properties for the development of shock/stress sensors\nAbstract: Luminescent stimulus-responsive materials are receiving increasing attention due to their switchable optical properties in response to external stimuli\, which lead to a variety of potential applications such as stress detection\, optical recording\, and information storage. Among these materials\, luminescent mechanochromic materials are characterized by a change in their luminescence properties in response to external mechanical forces\, such as grinding. Materials based on transition metals—particularly those based on copper(I) halide—are of interest due to their wide structural diversity\, their broad range of photophysical properties\, and their economic and environmental advantages stemming from the low cost and limited toxicity of copper.   \nIn this context\, this thesis focuses on the study of new luminescent mechanochromic materials based on copper(I) iodide. New materials have been synthesized\, and their structure and optical properties have been characterized. Particular attention has been paid to understanding the relationships between the structure and the optical properties of these compounds. The materials have also been processed by incorporating them into polymer matrices\, for example\, to develop potential applications.    \nKeywords: Hybrid materials\, Copper(I) iodide\, Optical properties\, Luminescence mechanochromism\, Luminescence thermochromism
URL:https://www.cnrs-imn.fr/en/event/thesis-defense-by-alexia-rocheteau-miops/
LOCATION:Amphi IMN Lombarderie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/02/rocheteau_alexia.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261110T090000
DTEND;TZID=Europe/Paris:20261110T120000
DTSTAMP:20261105T143648Z
CREATED:20261027T155740Z
LAST-MODIFIED:20261105T143648Z
UID:7894-1794301200-1794312000@www.cnrs-imn.fr
SUMMARY:Thesis Defense by Oumar TOURE (PCM)
DESCRIPTION:Fabrication of Thin Perovskite Layers via Reactive Sputtering for Microdevices for Electrochemical Energy Storage\nAbstract: \nThe development of the Internet of Things (IoT) is driving a growing need for microdevices for localized electrical energy storage and power supply. Perovskite oxides\, with the generic formula ( ABO3 )\, are attracting increasing interest as anode materials for high-power Li-ion microbatteries. We propose a novel strategy for fabricating LaxNbO3 and LaxTiO3 perovskite thin films by co-sputtering\, partially replacing lanthanum at the A site with vacancies. The aim is to provide an alternative to the anode materials typically used for microbatteries\, such as metallic lithium or Li4Ti5O12 . The creation of a vacancy network within the perovskite layer aims to facilitate lithium insertion and rapid ion diffusion within the material.     \nIn this doctoral research\, thin films were deposited by reactive magnetron sputtering using lanthanum and niobium or lanthanum and titanium targets. The thin films were crystallized during post-deposition annealing at high temperatures (T ≥ 1000 °C). Several techniques were used to characterize the structural and chemical properties of the thin films\, as well as their electrochemical properties via cyclic voltammetry and galvanostatic cycling. Characterizations using X-ray absorption spectroscopy and in-situ X-ray diffraction were specifically developed to provide insights into the charge storage mechanisms in these materials.    \nKeywords: Perovskite material\, Thin film\, Magnetron sputtering\, Energy storage\, Electrochemistry\, Lithium-ion battery\, Microbattery \n\nPerovskite-based thin films deposited by reactive magnetron sputtering for high-power electrochemical energy storage microdevices\nAbstract: \nThe development of the Internet of Things (IoT) is driving a growing need for electrical energy storage micro-devices. Perovskite-based oxides\, of general formula ABO 3 \, are attractive increasing interest as anode materials for high-power Li-ion micro-batteries. In this work\, we investigate a novel strategy for manufacturing La x NbO 3 and La x TiO 3 perovskite thin films by co-sputtering\, based on the partial substitution of lanthanum at the A-site with vacancies. The aim is to provide an alternative to standard anode materials such as lithium and Li 4 Ti 5 O 12 \, used in microdevices. Creating a vacancy network within the perovskite layer is intended to facilitate lithium insertion and enable rapid ionic diffusion within the material.     \nTo achieve this\, the thin films were deposited by reactive magnetron co-sputtering of two targets (i.e.\, lanthanum/niobium or lanthanum/titanium). Crystallization of the thin films was induced through high-temperature (T ≥ 1000°C) post-deposition annealing. Several techniques were used to characterize the structural and chemical properties of the films\, as well as their electrochemical properties via cyclic voltammetry and galvanostatic cycling. Operando X-ray absorption spectroscopy and X-ray diffraction characterizations were also specifically developed to gain a better understanding of the charge storage mechanisms in these materials.    \nKeywords: Perovskite materials\, Thin films\, magnetron sputtering\, energy storage\, electrochemistry\, Li-ion\, microbattery
URL:https://www.cnrs-imn.fr/en/event/thesis-defense-by-oumar-toure-pcm/
LOCATION:Amphi IMN Lombarderie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/02/Toure-Oumar.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261106T143000
DTEND;TZID=Europe/Paris:20261106T163000
DTSTAMP:20261027T110115Z
CREATED:20261015T063645Z
LAST-MODIFIED:20261027T110115Z
UID:7804-1793975400-1793982600@www.cnrs-imn.fr
SUMMARY:Lecture by Shirley MENG
DESCRIPTION:Special Lecture by Shirley Meng\, CNRS Ambassador for Chemical Sciences\, on Electrochemical Energy Storage \n\nShirley Meng \nProfessor of Molecular Engineering at the Pritzker School of Molecular Engineering at the University of Chicago (United States) and Vice President for Industry Relations at Nanyang Technological University Singapore (Singapore) \nWe are pleased to welcome Professor Shirley Meng to our laboratory (UMR 6502 CNRS\, Nantes University) as part of her tour of France as a CNRS ambassador for the chemical sciences. She will deliver an exceptional lecture in the IMN auditorium on Friday\, November 6\, 2026\, at 2:30 p.m.  \nA professor of molecular engineering at the Pritzker School of Molecular Engineering at the University of Chicago (United States) and vice president for industry relations at Nanyang Technological University Singapore (Singapore)\, Shirley Meng will deliver a series of lectures at several laboratories in France beginning October 30\, 2026. \nAn internationally recognized expert in energy storage materials\, she focuses on the fundamental mechanisms that govern battery operation and aging\, while exploring innovative solutions to improve their performance and durability. Her research opens up significant opportunities to transform the way we produce\, store\, and use energy.  \nThis visit will be a unique opportunity to learn about his work and discuss current and future scientific challenges in electrochemical energy storage. \nSee you on Friday\, November 6\, at 2:30 p.m. at the IMN\, on the Lombarderie campus of the Faculty of Science and Technology—Nantes University! \nThe conference is open to everyone\, but registration is required. To confirm your attendance\, please send an email to: communication@cnrs-imn.fr  \nLearn more \nAbstract \nHigh-energy\, long-life rechargeable batteries are considered a key enabling technology for deep decarbonization. Energy storage in electrochemical form is attractive due to its high efficiency and fast response time. In addition to their technological importance\, electrochemical devices also provide a unique platform for fundamental and applied materials science and research\, since ion movement is often accompanied by inherently complex phenomena related to phase changes\, changes in electronic structure\, and defect generation. Characterization techniques using synchrotron X-rays\, electrons\, and neutrons play a critical role in understanding ion transport\, dynamic structural changes\, and the corresponding degradation processes in high-energy rechargeable batteries. During my CNRS tour as the Ambassador of Chemistry\, I will discuss several new perspectives for energy storage materials\, including new superionic conductors\, new intercalation compounds\, and their interfacial engineering. With recent advances in photon and electron characterization tools and computational/AI methods\, we can explore ionic mobility\, charge transfer\, and phase transformations in electrode and electrolyte materials in situ in materials that go beyond simple intercalation. As the world moves toward the electrification of everything\, humanity will need more terawatt-hour-scale battery storage solutions beyond current lead-acid and lithium-ion chemistries. How to scale up rapidly and create truly circular approaches to manufacturing and recycling new battery chemistries—such as sodium-ion batteries and solid-state batteries—has become the most pressing need for our scientific community.        \nContact: Philippe Moreau (ST2E)
URL:https://www.cnrs-imn.fr/en/event/lecture-by-shirley-meng/
LOCATION:Amphi IMN Lombarderie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/10/Shirley-Portrait-2026_vignette_agenda_web.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261105T093000
DTEND;TZID=Europe/Paris:20261105T123000
DTSTAMP:20261028T150439Z
CREATED:20261027T103750Z
LAST-MODIFIED:20261028T150439Z
UID:7852-1793871000-1793881800@www.cnrs-imn.fr
SUMMARY:Thesis Defense by Pauline ARNOULIN (co-supervised by ID2M)
DESCRIPTION:Thermal Control to Optimize Deposition Rates in Wire Arc Additive Manufacturing (WAAM). Application to Stainless Steel Alloys Using Dual-Wire TIG Welding: Optimization of Microstructure and Stress Distribution \nAbstract: Wire arc additive manufacturing (WAAM) enables the production of parts measuring several cubic meters in size and of moderate complexity by depositing metal layer by layer. This competitive process\, tailored to industrial needs\, is characterized by high productivity and high-value-added steps. However\, the inevitable use of an intense\, localized heat source generates complex physical phenomena that cause collapses\, deformations\, and residual stresses\, all of which adversely affect the performance of the process and the parts produced. To minimize these defects\, an initial innovative strategy developed in this work involves positioning the filler wires within the electric arc to optimally distribute the input energy across the base metal.    \nThis method improves the instantaneous deposition rate from 1 to 5.2 kg/h. Another approach being studied involves controlling solid-state phase transformations to reduce volumetric distortions within the workpiece\, which lead to deformation and residual stresses. To achieve this\, new alloys are developed in situ by simultaneously mixing two stainless steels\, thereby generating promising microstructures and thermomechanical behaviors. Depending on the conditions\, these alloys can reduce deformations by up to 45% and the magnitude of residual stresses by as much as 61%\, and ultimately refine the microstructure by 99% (reaching approximately 10 μm)\, thereby improving the performance of parts manufactured using the WAAM-TIG process.    \nKeywords: Dual-wire arc additive manufacturing\, deposition rate\, stainless steels\, solid-state phase transformations\, microstructures\, deformations\, residual stresses \n\nThermal Management for Optimized Deposition Rate in Wire Arc Additive Manufacturing (WAAM). Application to Stainless Steel Blends Using Dual-Wire TIG: Optimization of Microstructure and Residual Stress Distribution \nAbstract: Wire Arc Additive Manufacturing (WAAM) enables the production of moderately complex parts measuring several cubic meters by depositing metal layer by layer. This cost-effective and industry-adapted process stands out for its high productivity and high-value-added steps. However\, the inevitable use of an intense and localized heat source generates complex physical phenomena that lead to collapses\, deformations\, and residual stresses\, all of which are detrimental to the performance of both the process and the parts produced. To address these issues\, the first innovative strategy developed in this work involves positioning the filler wires within the electric arc to optimally distribute the input energy throughout the base metal.    \nThis approach significantly improves the instantaneous deposition rate\, increasing it from 1 to 5.2 kg/h. Another method currently under investigation focuses on controlling solid-state phase transformations to minimize volumetric distortions in the part\, which are responsible for deformations and residual stresses. To achieve this\, new alloys are developed in situ by simultaneously blending two stainless steels\, resulting in promising microstructures and thermomechanical properties. Depending on the conditions\, these alloys can reduce deformations by up to 45% and the magnitude of residual stresses by 61%\, while also refining the microstructure by 99% (reaching a scale of around ten μm)\, ultimately enhancing the performance of parts manufactured using the GTAW-WAAM process.    \nKeywords: Double-Wire Arc Additive Manufacturing\, deposition rate\, stainless steels\, solid-state phase transformations\, microstructures\, strains\, residual stresses
URL:https://www.cnrs-imn.fr/en/event/thesis-defense-by-pauline-arnoulin-co-supervised-by-id2m/
LOCATION:Lecture Hall 1\, IRESTE Chantrerie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/02/arnoulin_pauline.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261102T160000
DTEND;TZID=Europe/Paris:20261102T190000
DTSTAMP:20261028T075938Z
CREATED:20261027T100516Z
LAST-MODIFIED:20261028T075938Z
UID:7845-1793635200-1793646000@www.cnrs-imn.fr
SUMMARY:Thesis Defense by Natalie HERKENDAAL (ST2E)
DESCRIPTION:Optimization of Polyacrylic acid-based Binders for Silicon-Graphite Electrodes in Li-ion Batteries\nAbstract: \nSilicon-rich anodes offer a promising avenue for increasing the energy density of lithium-ion batteries\, but their implementation remains challenging due to the significant volume changes in silicon during charging and discharging cycles\, which promote mechanical degradation and the continuous formation of the solid electrolyte interphase (SEI). Polyacrylic acid (PAA) is a widely studied binder for silicon-based electrodes due to its strong interactions with the native silicon oxide surface\, which enhance electrode cohesion and may contribute to the formation of an artificial passivation layer. This thesis investigates the relationships between the characteristics of the PAA binder\, the electrode fabrication process\, the electrodes’ structure\, their interfacial properties\, and the electrochemical performance of silicon-graphite composite anodes.   \nThe main PAA formulation parameters were systematically studied\, including binder content\, molecular weight\, degree of neutralization\, and the nature of the counterion associated with the carboxylate group. Increasing the PAA content improved the stability of the suspension and the electrode fabrication process up to an optimal binder coverage ratio\, beyond which polymer agglomeration increased the electrode’s resistivity and reduced its electrochemical performance. The molecular weight of the binder and the mass fraction of solids in the suspension exhibited coupled effects on the dispersion of active materials\, water retention\, electrode cohesion\, and SEI formation. Although different molecular weights provided distinct advantages in terms of processability and mechanical properties\, comparable electrochemical performance was achieved by appropriately optimizing the solid content of the ink.    \nThe degree of PAA neutralization was also found to have a significant influence on electrode properties and cell performance. Partial neutralization at higher pH improved processing and electrochemical performance\, whereas a lower degree of neutralization was associated with accelerated degradation under practical cell conditions. Finally\, the identity of the counterion played a decisive role in the suspension’s performance. Although divalent cations promoted ionic interactions between PAA chains\, the resulting polymer aggregation adversely affected the suspension’s rheology\, electrode properties\, and cycling performance. Conversely\, monovalent cations improved the processing and performance of the studied formulation\, with Na+ promoting the formation of a more stable SEI rich in LiF.     \nOverall\, this work demonstrates the complex interaction between the various parameters studied and the benefits of optimizing them collectively to improve the electrochemical performance of silicon-rich anodes. The efficiency of the binder was improved by optimizing the mass fraction of solids to 36%\, increasing the degree of neutralization to 66%\, and using Na+ as the counterion. This combination maximized electrochemical performance while providing a practical path toward reducing the inactive mass in this high-energy-density electrode formulation. The systematic optimization of this formulation highlights several strategies for refining the binder formulation\, thereby representing a step toward the commercialization of silicon-rich anodes.    \nKeywords: lithium-ion batteries; silicon anodes; silicon-graphite anodes; polyacrylic acid; PAA; aqueous synthesis; aqueous binder; binder neutralization; solid fraction of the ink; solid-electrolyte interface
URL:https://www.cnrs-imn.fr/en/event/thesis-defense-by-natalie-herkendaal-st2e/
LOCATION:Videoconferencing
ATTACH;FMTTYPE=image/png:https://www.cnrs-imn.fr/wp-content/uploads/2026/10/Herkendaal_Natalie.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261102T140000
DTEND;TZID=Europe/Paris:20261102T153000
DTSTAMP:20261027T104446Z
CREATED:20261026T153131Z
LAST-MODIFIED:20261027T104446Z
UID:7834-1793628000-1793633400@www.cnrs-imn.fr
SUMMARY:Seminar by Hiroshi TAKATSU
DESCRIPTION:Exploring Quantum Materials through Anion Chemistry and External Stimuli \n\nHiroshi Takatsu \nDepartment of Chemical Science and Engineering\, Graduate School of Engineering\, Kyoto University\, Kyoto\, Japan \nAbstract \nConventional solid-state chemistry controls crystal structures and electronic states through chemical composition and temperature. Mixed-anion chemistry expands this framework by combining anions with different sizes\, charges\, and bonding characteristics\, while external stimuli provide additional pathways to access structures and phases that are difficult to achieve under conventional synthetic conditions.  \nIn this seminar\, I will present examples from our recent work. First\, in the oxyhydride EuVO 2 H\, pressure and epitaxial strain induce intersite charge transfer between EuH and VO 2 layers\, resulting in metallization\, enhanced ferromagnetism\, and pronounced magnetic anisotropy [1-3]. Second\, ionic-liquid gating offers a different way to control anion chemistry\, enabling electrochemical F − -ion insertion into oxygen-deficient oxide films and yielding functional oxyfluorides [4]. Finally\, a topochemical reaction transforms Mo 2 Ta 2 O 11 into Mo 3 Ta 2 O 10 N through a double-to-single-layer conversion [5]\, which breaks the usual one-to-one structural correspondence between precursor and product structures and produces an itinerant two-dimensional kagomé system.    \nTogether\, these studies demonstrate how anion chemistry and external stimuli can reshape both reaction pathways and energy landscapes\, opening the door to structures and electronic states that are beyond the reach of conventional synthesis. \n  \n[1] M. Namba\, H. Takatsu*\, H. Kageyama*\, et al.\, J. Am. Chem. Soc. 2023\, 145\, 21807–21816.\n[2] M. Namba\, H. Takatsu*\, H. Kageyama*\, et al.\, Chem. Mater. 2024\, 36\, 3918–3924.\n[3] H. Takatsu*\, M. Namba\, H. Kageyama*\, et al.\, Inorg. Chem. 2026\, 65\, 2767–2773.\n[4] M. Namba\, H. Takatsu*\, H. Kageyama*\, et al.\, Chem. Mater. 2024\, 36\, 2076–2084.\n[5] R. Higuchi\, H. Takatsu*\, H. Kageyama*\, et al.\, J. Am. Chem. Soc. 2025\, 147\, 27576–27585. \nContact: Shunsuke Sasaki (PMN)
URL:https://www.cnrs-imn.fr/en/event/hiroshi-takatsu-seminar/
LOCATION:Amphi IMN Lombarderie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/10/Hiroshi_Takatsu.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261022T143000
DTEND;TZID=Europe/Paris:20261022T160000
DTSTAMP:20261021T080844Z
CREATED:20261021T080844Z
LAST-MODIFIED:20261021T080844Z
UID:7825-1792679400-1792684800@www.cnrs-imn.fr
SUMMARY:Rodrigo Sávio Pessoa Seminar
DESCRIPTION:Cold Plasma Technologies for Advanced Materials and Biomedical Applications: Research Highlights from LPP/ITA \n\nProf. Rodrigo Sávio Pessoa  \nLaboratory of Plasmas and Processes (LPP)\, Instituto Tecnológico de Aeronáutica (ITA)\, São José dos Campos\, São Paulo\, Brazil \nAbstract \nCold plasma technologies have emerged as versatile tools for tailoring material properties\, modifying surfaces\, and generating reactive chemical environments under relatively mild processing conditions. Their unique combination of energetic electrons\, reactive species\, and controllable interactions with matter enables applications across materials science\, nanotechnology\, and biomedicine.  \nThis seminar will present selected research activities conducted at the Laboratory of Plasmas and Processes (LPP) at the Instituto Tecnológico de Aeronáutica (ITA) in Brazil\, highlighting advances in plasma physics\, plasma-assisted materials processing\, and biomedical applications. \nThe presentation will begin with an overview of the plasma research infrastructure at LPP/ITA\, followed by examples of low-pressure and atmospheric-pressure plasma systems\, plasma diagnostics\, and computational modeling. Selected studies involving plasma-assisted surface modification\, plasma etching\, magnetron sputtering\, and atomic layer deposition will illustrate approaches for tailoring the physicochemical properties of functional materials and polymeric substrates.  \nParticular attention will be devoted to plasma–liquid interactions and the development of plasma-activated water and liquids for biomedical applications. Experimental results concerning reactive oxygen and nitrogen species\, antimicrobial activity\, and potential applications in endodontics and biomaterial functionalization will be discussed.\nFinally\, current challenges and future research directions will be addressed\, with an emphasis on opportunities for interdisciplinary collaboration in plasma science\, advanced materials\, and biomedical engineering.  \nKeywords: Cold plasma; Plasma–surface interactions; Functional materials; Plasma-activated water; Biomedical applications. \nContact: Abdou Djouadi
URL:https://www.cnrs-imn.fr/en/event/rodrigo-savio-pessoa-seminar/
LOCATION:Amphi IMN Lombarderie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/10/Rodrigo_Savio_Pessoa.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261016T093000
DTEND;TZID=Europe/Paris:20261016T133000
DTSTAMP:20261014T093550Z
CREATED:20261001T122709Z
LAST-MODIFIED:20261014T093550Z
UID:7718-1792143000-1792157400@www.cnrs-imn.fr
SUMMARY:Thesis Defense by Aline KNEUBL ANDREUSSI (ST2E)
DESCRIPTION:Effect of the Chemical and Macromolecular Structure of Polyacrylate Binders on the Cyclability of Silicon-Rich Anodes for Lithium-Ion Batteries\nAbstract: The increase in the energy density of lithium-ion batteries requires the development of anode electrodes with a higher capacity than graphite. SiOₓ/graphite composites show promise\, but volume changes in SiOₓ during cycling cause mechanical stress\, a loss of electronic connectivity\, and continuous growth of the solid electrolyte interphase (SEI). In this context\, the polymer binder is essential\, as it controls the electrode’s shape\, cohesion\, adhesion\, and stability. This thesis investigates the influence of the chemical and macromolecular structure of polyacrylate binders on silicon-rich SiOₓ/graphite anodes. The parameters studied include the acrylic acid/ethyl acrylate (AA/AE) ratio\, the incorporation of 2-acrylamido-2-methylpropanesulfonic acid (AMPS)\, pH\, the neutralizing cation\, molar mass\, and the addition of styrene-butadiene rubber (SBR). The electrodes were characterized by rheology\, SEM\, resistivity\, residual water content analysis\, mechanical testing\, half-cell cycling\, and post-mortem solid-state NMR.\nThe results show that the carboxylic/carboxylate groups derived from AA are critical for interactions with SiOₓ. The sodium-neutralized 85% AA–15% AE copolymer appears to be the best compromise\, with performance close to that of 100% AA\, better adhesion\, lower water content\, and a more robust formulation. Its suitability was confirmed under more application-oriented conditions: high SiOₓ content\, calendering\, alternative collectors\, temperature\, pre-upscaling\, and exploratory recycling.        \nKeywords: Lithium-ion batteries\, SiOx/graphite electrodes\, formulation\, polyacrylate binders \n\nInfluence of the Chemical and Macromolecular Structure of Polyacrylate Binders on the Cyclability of Silicon-Rich Negative Electrodes for Li-ion Batteries\nAbstract: Increasing the energy density of lithium-ion batteries requires negative electrodes with higher capacity than graphite. SiOₓ/graphite composites are promising candidates\, but volume changes in SiOₓ during cycling induce mechanical stress\, loss of electronic connectivity\, and continuous solid-electrolyte interphase (SEI) growth. In this context\, the polymer binder is a key component because it governs electrode processing\, cohesion\, adhesion\, and cycling stability. This thesis investigates the influence of the chemical and macromolecular structure of polyacrylate binders on silicon-rich SiOₓ/graphite anodes. The parameters studied include the acrylic acid/ethyl acrylate ratio (AA/AE)\, incorporation of 2-acrylamido-2-methylpropane sulfonic acid (AMPS)\, neutralization cation\, formulation pH\, molar mass\, and addition of styrene-butadiene rubber (SBR).\nThe electrodes were characterized using rheology\, SEM-EDX\, resistivity measurements\, residual water quantification\, mechanical testing\, half-cell cycling\, and post-mortem solid-state NMR. The results show that acrylic acid-derived carboxylic/carboxylate groups are essential for maintaining interactions with SiOₓ particles. Among the investigated compositions\, the sodium-neutralized 85%AA-15%AE copolymer provides the best overall balance\, with electrochemical performance close to that of 100%AA\, improved adhesion\, lower residual water content\, and better formulation robustness. Its practical relevance was further confirmed under more application-oriented conditions\, including higher SiOₓ content\, calendering\, alternative current collectors\, cycling temperature\, preliminary scale-up\, and exploratory electrode-scrap recycling.        \nKeywords: lithium-ion batteries\, SiOₓ/graphite electrodes\, formulation\, polyacrylate binders
URL:https://www.cnrs-imn.fr/en/event/thesis-defense-by-aline-kneubl-andreussi-st2e/
LOCATION:Amphi IMN Lombarderie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/10/alineka_min.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261008T140000
DTEND;TZID=Europe/Paris:20261008T160000
DTSTAMP:20261007T151108Z
CREATED:20260930T171611Z
LAST-MODIFIED:20261007T151108Z
UID:7690-1791468000-1791475200@www.cnrs-imn.fr
SUMMARY:Vladimir Pimonov Seminar
DESCRIPTION:Growth Kinetics and Structural Characterization of Carbon Nanotubes: From In Situ Observation to Raman Spectroscopy \n\nVladimir PIMONOV \nTeam Aggregates and Nanomaterials\, Institute of Light and Matter\, Claude Bernard University Lyon 1 \n\nZoom: https://univ-nantes-fr.zoom.us/j/87228058575 \n\nAbstract \nCarbon nanotubes (CNTs) remain a model system for studying the relationship between growth conditions\, structure\, and electronic properties. Their strong structure–property dependence makes controlling the synthesis a key challenge\, but understanding this control requires access not only to the final nanotube structure\, but also to the dynamics of its formation. This work combines in situ observation of individual single-walled CNT growth with automated image analysis and post-growth structural characterization.   \nDuring my Ph.D.\, in situ homodyne polarization microscopy was used to track the growth of individual CNTs under CVD conditions. Deep-learning-based detection and tracking enabled high-throughput extraction of growth kinetics from low-contrast videos and revealed dynamic instabilities\, including transitions between distinct growth regimes. These kinetic measurements were correlated with Raman characterization of the same nanotubes\, providing a direct link between growth behavior and structure. The same framework also highlighted the importance of the substrate: Raman studies of individual CNTs grown on quartz showed that the measured vibrational response reflects not only the intrinsic nanotube structure but also interactions with the local environment.    \nMy latest postdoctoral work extends this approach to CNT growth under an applied electric field\, using environmental TEM to observe growth directly at the nanoscale. Here again\, automated analysis is essential for extracting kinetic information from large video datasets and for identifying field-dependent changes in growth\, stability\, and failure mechanisms. Ongoing work combines these kinetic measurements with Raman-based structural analysis to examine how the electric field affects not only nanotube growth dynamics\, but also the resulting nanotube population. Together\, these studies illustrate how in situ microscopy\, data-driven image analysis\, and Raman spectroscopy can be combined to investigate the interplay between synthesis conditions\, the environment\, growth kinetics\, and nanotube structure.    \nContact: Chris Ewels (PMN)
URL:https://www.cnrs-imn.fr/en/event/vladimir-pimonov-seminar/
LOCATION:Videoconferencing
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/09/Vladimir_Pimonov.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261008T133000
DTEND;TZID=Europe/Paris:20261008T150000
DTSTAMP:20261002T091559Z
CREATED:20261002T085740Z
LAST-MODIFIED:20261002T091559Z
UID:7728-1791466200-1791471600@www.cnrs-imn.fr
SUMMARY:"Solid-State Chemistry Thursdays" Seminar - Maurizio Cossi (University of Piemonte Orientale\, Italy)
DESCRIPTION:Toward a New Description of the Internal Structure of Amorphous Porous Carbons \n \nMaurizio Cossi \nUniversity of Eastern Piedmont\, Italy \nVideo: https://univ-nantes-fr.zoom.us/j/84576001578?pwd=2yHtI3N2g2iNumDaXqYtyBMt4azR6A.1 \nAdsorption processes in nanoporous materials are of great importance in a number of fields\, including gas storage\, separation\, and purification; sensing; heterogeneous and hybrid catalysis; and others. Knowledge of the material’s structure and its relationship to adsorbent-adsorbate interactions strongly influences the interpretation of experimental results and the design of new\, more efficient adsorbents.  \nThe description of the porous volume distributions and the measurement of specific surface areas are extremely important in this context. \nWe will briefly review the modern techniques used to characterize the porous structure of various materials (activated carbons\, zeolites\, MOFs\, etc.)\, along with the most recent theoretical methods that can support experimental characterization. In particular\, we will present the newest computational approach\, PoLA (Porosity Local Analysis)\, designed to describe the porous volume and surface in both atomistic models and real samples\, and to predict adsorption properties.  \n[1] A. Zoccante et al.\, ACS Omega 2025\, 10\, 31623 \n[2] M. Cossi et al.\, *Carbon 2026*\, 257\, 121713
URL:https://www.cnrs-imn.fr/en/event/solid-state-chemistry-thursdays-seminar-maurizio-cossi-university-of-piemonte-orientale-italy/
LOCATION:Videoconferencing
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/10/Maurizio_Cossi.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261005T143000
DTEND;TZID=Europe/Paris:20261005T160000
DTSTAMP:20261002T135359Z
CREATED:20260930T184136Z
LAST-MODIFIED:20261002T135359Z
UID:7699-1791210600-1791216000@www.cnrs-imn.fr
SUMMARY:Wen Luo Seminar
DESCRIPTION:Interphase Design and In-Situ Characterization for Rechargeable Batteries \n\nWen LUO \nWuhan University of Technology (WUT) \nBio\nWen Luo is a professor of physics at Wuhan University of Technology (WUT). She received her Ph.D. in materials science and engineering from WUT in 2018 under the supervision of Prof. Liqiang Mai. During her Ph.D. studies\, she worked as a visiting student at the University of Lorraine (2016–2017) under the supervision of Prof. Jean-Jacques Gaumet. Her current research interests focus on materials for energy and electronics\, including next-generation batteries\, neuromorphic devices\, failure analysis techniques\, and in-situ characterizations. She has led more than 10 projects\, including grants from the National Natural Science Foundation of China (NSFC)\, the France-China Young Talents Program of the Ministry of Science and Technology of China (MOST). She has published over 60 academic papers as first or corresponding author\, including papers in *Nature Communications*\, *Advanced Materials*\, *National Science Reviews*\, *JACS*\, *Chem*\, and *Matter*\, and holds over 10 patents. She currently serves on the youth editorial board of *Carbon Energy*\, *Rare Metals*\, and *Advanced Powder Materials*\, and is a board member of *Coatings*.           \nAbstract\n. The stability of the electrode-electrolyte interface is crucial for the long-term operation of high-performance rechargeable batteries. My talk will introduce our recent advances in interphase design for non-aqueous potassium-ion batteries (PIBs) and emerging ultrafast-charging aqueous proton batteries (APBs).  \nContact: Olivier Crosnier (ST2E)
URL:https://www.cnrs-imn.fr/en/event/wen-luo-seminar/
LOCATION:ISITEM Chantrerie Boardroom
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/09/Wen_Luo.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261002
DTEND;VALUE=DATE:20261005
DTSTAMP:20260928T072729Z
CREATED:20260911T124304Z
LAST-MODIFIED:20260928T072729Z
UID:7414-1790899200-1791158399@www.cnrs-imn.fr
SUMMARY:Science Festival 2026
DESCRIPTION:The IMN looks forward to seeing you at the 2026 Science Festival! \nThis year’s theme: Sophisticated Flavors \nOctober 2–4 at the Dobrée Museum \nThe IMN is offering brand-new workshops on nutrition: \n\nFood Rheology\nInfrared Spectroscopy for Food Quality Analysis\nFood Packaging Materials\nMeasuring pH Using Cabbage Leaves\nViewing Certain Foods Under a Microscope\n\nTo learn more about the Dobrée Museum’s Science Village \nContact: jeremy.barbe@cnrs-imn.fr\, sandrine.perruchas@cnrs-imn.fr \n \n  \n 
URL:https://www.cnrs-imn.fr/en/event/science-festival-2026/
LOCATION:Dobrée Museum
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/09/FDS26_affiche_agenda_web.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20260911T143000
DTEND;TZID=Europe/Paris:20260911T163000
DTSTAMP:20260901T143424Z
CREATED:20260901T100405Z
LAST-MODIFIED:20260901T143424Z
UID:7216-1789137000-1789144200@www.cnrs-imn.fr
SUMMARY:Talita Mazon Seminar
DESCRIPTION:Engineering Functional Materials for Real-World Applications: Biosensing\, Gas Sensing\, and Energy Storage \n\nTalita MAZON \nCTI – Renato Archer Information Technology Center (CTI)\, Campinas\, São Paulo\, Brazil \nBio\nDr. Talita Mazon is a Senior Researcher at the Renato Archer Information Technology Center (CTI) in Brazil\, with a background in chemistry (B.S. – 1994\, M.S. – 1997\, and Ph.D. – 2001) and expertise in materials science and nanotechnology. Her research focuses on the design and synthesis of advanced functional materials\, including nanostructured metal oxides\, ceramic systems\, and carbon-based composites. She has extensive experience in developing electrochemical biosensors for the detection of clinically relevant biomarkers\, as well as in integrating these materials into portable\, low-cost diagnostic platforms. She has authored over 45 scientific publications in peer-reviewed journals. Her work also encompasses energy storage and environmental applications\, including nanomaterials for gas sensors\, supercapacitors\, and photocatalytic systems for pollutant degradation. Prof. Mazon has coordinated and participated in several national and international research projects and collaborates closely with academic and industrial partners. Her research aims to bridge the gap between fundamental materials development and real-world technological applications\, contributing to innovation in health\, environmental solutions\, and energy.         \nAbstract \nThis talk will present recent advances in the design and engineering of functional materials for real-world applications\, with a focus on biosensing\, gas sensing\, and energy storage. The work highlights the development of nanostructured materials—including metal oxides\, carbon-based composites\, and hybrid nanoarchitectures—tailored to achieve enhanced electrical\, catalytic\, and surface properties.  \nIn the field of biosensing\, emphasis will be placed on integrating these materials into electrochemical platforms for the detection of clinically relevant biomarkers\, enabling sensitive\, low-cost\, and portable diagnostic solutions. Strategies such as surface engineering\, nanoheterojunction design\, and the use of catalytic nanomaterials will be discussed as key approaches to improving sensitivity\, selectivity\, and stability.  \nFor gas-sensing applications\, the presentation will explore the use of semiconductor metal oxides and nanostructured heterojunctions for the detection of gases and volatile organic compounds (VOCs). Particular attention will be given to the role of morphology control and surface functionalization\, as well as to strategies for enhancing selectivity and response under real operating conditions.  \nIn the field of energy storage\, this presentation will address recent advances in the development of biochar-based nanostructured materials for supercapacitors\, focusing on improving charge storage capacity\, cycling stability\, and energy density through controlled composition and architecture. \nOverall\, the talk will explore the challenges and opportunities involved in translating functional materials from laboratory-scale research to practical applications\, with a focus on scalability\, sustainability\, and the development of cost-effective technologies that have a real societal impact. \n  \nContact: Mireille Richard-Plouet (PCM)
URL:https://www.cnrs-imn.fr/en/event/talita-mazon-seminar/
LOCATION:Amphi IMN Lombarderie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/09/Talita_Mazon.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20260910T133000
DTEND;TZID=Europe/Paris:20260910T150000
DTSTAMP:20260901T154444Z
CREATED:20260901T152907Z
LAST-MODIFIED:20260901T154444Z
UID:7242-1789047000-1789052400@www.cnrs-imn.fr
SUMMARY:"Solid-State Chemistry Thursdays" Seminar - Pauline Martinetto (UGA / Néel Institute\, CNRS-UGA)
DESCRIPTION:Physicochemical Analyses of Ancient and Cultural Heritage Materials: From Non-Invasive Measurements on Artworks to Semi-Automated Quantitative Phase Analysis \n \nPauline Martinetto \nUGA / Néel Institute\, CNRS-UGA Grenoble \nVideo: https://univ-nantes-fr.zoom.us/s/88629102497 \nCultural heritage materials are increasingly the focus of interdisciplinary research programs\, in which the approaches of the various disciplines involved are combined with the goal of tracing the history of works of art\, from their creation and manufacture to their current state of deterioration. At the Institut Néel\, we seek to develop X-ray analysis methods to reveal the traces recorded in these materials in order to identify the raw materials\, their composition\, and\, if possible\, their provenance and the technical expertise involved.  \nIn this presentation\, I will discuss the analytical approach we have recently developed\, which combines non-invasive fluorescence spectroscopy and X-ray diffraction measurements performed directly on the artworks with synchrotron diffraction mapping and tomography experiments on micro-samples. The use of these synchrotron imaging techniques results in the collection of massive amounts of data\, which has led us to develop rapid\, semi-automated processing methods that allow us to obtain quantitative information at every point in the image\, which are particularly informative for understanding complex pictorial stratigraphies. I will illustrate our approach by presenting various examples\, drawn in particular from the interdisciplinary PATRIMALP program (IDEX\, UGA)\, and will focus specifically on the studies we have conducted on the polychromy of late-Medieval sculptures and manuscripts.
URL:https://www.cnrs-imn.fr/en/event/solid-state-chemistry-thursdays-seminar-pauline-martinetto-uga-neel-institute-cnrs-uga/
LOCATION:Videoconferencing
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/09/Pauline_Martinetto.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20260908T140000
DTEND;TZID=Europe/Paris:20260908T160000
DTSTAMP:20260901T101238Z
CREATED:20260901T094217Z
LAST-MODIFIED:20260901T101238Z
UID:7205-1788876000-1788883200@www.cnrs-imn.fr
SUMMARY:Alfonso Carrillo Seminar
DESCRIPTION:Toward the Compositional Optimization of Multicomponent Exsolved Metallic Nanoparticles from Perovskite Electrodes \n\nAlfonso J. CARRILLO  \nInstitute of Chemical Technology (Polytechnic University of Valencia – Spanish National Research Council)\, Spain \nBio\nDr. Alfonso J. Carrillo holds a degree in Chemical Engineering from the University of Salamanca\, a master’s degree in Renewable Energy from the University of León\, and a Ph.D. in Chemical Engineering from Rey Juan Carlos University. After completing his doctoral research at IMDEA Energy\, he held postdoctoral positions at ETH Zurich (Switzerland) and the Massachusetts Institute of Technology (USA)\, where he was an Eni-MIT Energy Fellow. He has received several awards and fellowships\, including recognition as a Chemical Communications Emerging Investigator 2024\, a Leonardo Grant from the BBVA Foundation\, a Junior Leader Fellowship from the “la Caixa” Foundation\, a Juan de la Cierva Fellowship\, and a research grant from the Iberdrola Foundation.   \nHe is currently a tenured scientist at the Spanish National Research Council (CSIC)\, based at the Institute of Chemical Technology (ITQ) in Valencia\, where he conducts research as part of the Energy Conversion and Storage Group. His research focuses on the development of redox materials for energy applications\, with a particular emphasis on thermochemical energy storage and renewable fuel production.  \nAbstract \nThe exsolution of metallic nanoparticles from perovskite oxides is a promising method for producing highly dispersed and stable catalysts through annealing in H₂-containing atmospheres. These nanoparticles remain anchored to the oxide surface\, preventing sintering and enhancing resistance to carbon deposition\, which leads to superior long-term catalytic performance compared to conventional noble metal-supported systems. Moreover\, compositional tuning of the host oxide enables the controlled exsolution of alloy nanoparticles with unique electrocatalytic properties. However\, managing the exsolution of multiple cations requires careful control of processing conditions and fine-tuning of the B-site composition. This is primarily due to the varying reducibility of each element (following Ellingham trends)\, which significantly influences the subsequent concentration of each constituent in the exsolved nanoparticle.     \nOur group has spent the last few years studying multicomponent exsolution using Sr₂Fe₁.₅Mo₀.₅O₆₋δ-based perovskites as a platform. First\, because these materials serve as excellent electrodes for solid oxide electrochemical cells. Second\, this class of perovskites can readily accommodate multiple cations substituting Fe at the B-site\, facilitating the exsolution of multicomponent nanoparticles. We initially investigated the exsolution of Ni-Co-Fe multicomponent alloys. By optimizing the microstructure and fine-tuning the exsolution treatment parameters\, we achieved functionalization with ternary alloy nanoparticles (~10 nm) that previously demonstrated excellent performance in CO₂ electrolysis\, with high Faradaic efficiency and low polarization resistance. Here\, we demonstrate that adjusting the gas atmosphere\, temperature\, and pressure allows for further control of nanoparticle composition. Notably\, high-pressure exsolution (up to 100 bar) revealed a volcano-like dependence of both the extent of exsolution and the alloy composition on pressure. We also show that redox cycling under atmospheric pressure modifies surface chemistry\, leading to Fe enrichment. Lastly\, we explore temperature effects on Cu-Co-Fe-Ni exsolution\, identifying conditions that favor the formation of Janus-type nanoparticles\, primarily driven by the low miscibility of Cu and metallic Fe. Interestingly\, these phase-separated Janus-type nanoparticles significantly alter the reversibility of exsolution in this system\, leading to the formation of pyramidal NiO nanoparticles instead of complete redissolution.          \nFinally\, we reveal how adjusting the composition of these multielemental exsolved nanoparticles (via phase separation or Fe enrichment) affects the catalytic properties of these materials\, directing reactions toward targeted products. These results highlight the potential and versatility of multicomponent nanoparticle exsolution in (electro)catalytic processes for renewable fuel production.  \n  \nContact: Clément Nicollet (ST2E)
URL:https://www.cnrs-imn.fr/en/event/alfonso-carrillo-seminar/
LOCATION:Amphi IMN Lombarderie
ATTACH;FMTTYPE=image/jpeg:https://www.cnrs-imn.fr/wp-content/uploads/2026/09/Alfonso-Carrillo.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20260901
DTEND;VALUE=DATE:20260904
DTSTAMP:20260720T140002Z
CREATED:20260615T084503Z
LAST-MODIFIED:20260720T140002Z
UID:6396-1788220800-1788479999@www.cnrs-imn.fr
SUMMARY:15th France-Japan Symposium on Lithium Batteries and Next Generations
DESCRIPTION:The purpose of the 15th France-Japan Symposium on Lithium Batteries and Next Generations is to provide a forum for French and Japanese researchers to present and discuss recent developments related to next-generation batteries. \nThis seminar focuses on advanced lithium-ion batteries\, all-solid-state batteries\, air batteries\, sodium-ion batteries\, multivalent cation batteries\, supercapacitors\, redox flow batteries\, high-power systems\, and new electrochemical energy storage devices. Developments in positive and negative electrodes\, electrolytes\, and in situ/operando techniques will be discussed.  \nFor more information: https://fr-jp-li-batt15.sciencesconf.org/?lang=fr
URL:https://www.cnrs-imn.fr/en/event/next-french-japanese-meeting/
LOCATION:Amphi IMN Lombarderie
END:VEVENT
END:VCALENDAR